Spheres of Application

  1. Water supply system. External supply lines and facilities. Industrial water desalination plants and units.

  2. Sewerage system. External supply lines and facilities.

  3. Heat supply system. External heat supply systems with water temperature up to 120°С.

  4. Oil and gas extraction. transportation of oil products from the wellsite to separating facilities. Chemical liquids transportation.

  5. High pressure pipelines for artificial snow making devices.

  6. Pipelines for fire extinguisher systems.

  7. Pipelines for electrochemical protection of the underground metal constructions.

Ductile iron pipe usage in other spheres must be discussed with the manufacturer.





 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Ductile iron pipe usage in other spheres must be discussed with the manufacturer.

Ductile Iron Pipes

Svobodny Sokol ductile iron pipes DN 80-1000 mm are produced 6 meters long in complex with rubber gasket and with internal lining and external protective coatings according to All Union State Standard R (Russian national standard (ГОСТ)), ISO 2531, EN 545, EN 598.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Outer coating of ductile iron pipes 

The external material of a pipe is covered with protective zinc metal and final protection coating according to ISO 8179

 

 

Internal ductile iron pipe lining 

The inner surface of the pipe may have cement mortar lining (CML). Thickness and properties are according to  ISO 4179.

The unique properties of the cement mortar lining lie in both passive and active protective effect. 

in case of agressive soil or transported liquid other types of coatings can be used. It is recommended to consult the manufacturer on their application.

Functional peculiarities of socket and spigot joints

Socket joints are made in such a way that perfect tightness is ensured due to the contact pressure between the rubber gasket and the pipe material as well as due to the water pressure. 

Socket type connection is not rigid and permits the connected pipes to move to the corner from 1.5 to 5owithout joints losing tightness, it offers certain advantages when laying pipes and adjusting to the soil movement, besides it permits to lay pipes in a circle of big radius without fittings, and make adjustment to the pipeline route.

Socket «Tyton» joint

Socket "Tyton" joint, with rubber gasket for use with the operating pressure from 3.0 to 6.4 MPa (depends on diameter) for pipelines DN 80-1000 mm

 «RJ» Joint 

Restrained socket joint with rubber gasket for use with the operating pressure from 2.5 to 8.8 MPa  (depends on diameter) for pipelines DN 80-500 mm

 «RJS» Joint

Restrained socket joint with rubber gasket for use with the operating pressure from 1.6 to 3.2 MPa  (depends on diameter) for pipelines DN 600-1000 mm

DIPCOM AG. Welcome to professionals.

Получите бесплатную консультацию! 
Звони+41 (41) 320 37 37
e- mail: info@dipcom.ch

© 2016 DIPCOM AG. Site is mabe by Wix.com

Нужны столярные работы ?